Cathodic Protection
Since its inception, Newtech has been participating in the cathordic protection tenders.. We started our co-operation with Cathodic Protection Company Ltd, (CPC), UK in the year 2001 and secured our first order from the Ministry of Electricity & Water. From then onwards, Newtech has been securing orders for providing CP systems for Pipe lines (both sacrificial and ICCP), Water tanks, Concrete Steel structures, Deep well anode beds (ICCP) & Vessels etc.
This is a technique used to prevent corrosion of metal surfaces by making it the cathode of an electrochemical cell. This can be used for underground pipelines and other structures where passive galvanic cathodic protection is not adequate.
Cathodic Protection products and solutions for pipelines, storage tanks (internals & externals) power stations, pilings etc.
FEATURED PRODUCTS
Environment
Under this division, we supply, install and commission all kinds of environmental monitoring devices, be it Ambient Air quality monitoring, stack monitoring, moving vehicles monitoring, fence line monitoring, etc., We are also capable of auditing of CEM systems by using USEPA methods. We do have approved quality instruments, Mobile Laboratory and trained & certified staff to carryout the works.
Environmental System Products Inc.
Environmental Systems Products, Inc., USA knows more about vehicle emissions testing than any other Environmental based company in the world. For more than 25 years, with over 70 patents for emissions testing and related products and more than 13,000,000 vehicle emissions tests conducted around the world each year, its no wonder that ESP has advanced into a state–of-the-art leader in practical remote sensing technology.
Accu Scan 4000 combines highly advanced windows based software with established remote sensing technology to direct an infrared beam across any street or highway, entrance or exit ramp, parking lot lane or other roadway to a compact, unobstrusive Analyzer module. When a vehicle passes, the system automatticaly:
- Reads its exhaust plume in less than a second
Determines concentrations of HC, CO, CO2 and Nox
Records and Stores the data for later retrieval
Captures an image of the vehicle’s license plate for reference purposes
Records the speed of the vehicle as it passes for measurement validation
E Instruments International, LLCz
E Instruments International designs, manufactures and markets a complete range of innovative instrumentation solutions encompassing Combustion Gas Analyzers, Emissions Analyzers, Indoor Air Quality, and Calibration equipment especially designed for the power, process, industrial, institutional, food, and HVAC markets.
Product Range Includes:
- Industrial Emission Analyzers
HVAC Combustion Analyzers
Forklift and Automotive Exhaust Emission Analyzers
Calibrators
Tecora Group
Tecora is a leading supplier of stack emissions sampling systems, continuous dioxin emission samplers, gravimetric samplers, industrial hygiene devices, oxygen and combustion control analyzers.
Dioxin Emission Continuous Monitoring
DECS is the solution for the continuous emission sampling of dioxin, furans (PCDD/PCDF), PCB and other POP’s. It is permanently installed on stack for continuous sampling from 6 hours up to 6 weeks. According to EN1948 and USEPA 23, DECS adopts the filter condenser method with adsorbing trap on wet gas.
Portable Ambient Air Quality Monitor
These types of Portable monitors can be used to monitor air quality in urban spots, roadside and even used for risk assessment in work places. The parameters available are Nox CO, CO2, O3 and PM.
GrayWolf Sensing Solutions, LLc
Indoor air quality (IAQ) Monitors make proactive IAQ surveys efficient and easy to conduct. They optimize the balance between facility energy efficiency and occupant health & comfort. Identify potential IAQ issues before they become problems and respond immediately to complaints with the highly accurate, extremely advanced and most intuitive portable IAQ meters and test instrumentation available today.
These IAQ meters are designed for both walk-thru surveys and for long term (hours/days/weeks) trend logging: the 2 modes necessary for thorough indoor air quality investigations.
Product Range Includes:
- Toxic Gas Test Instruments
TVOC (PID) Monitor
Air Velocity Meter
Differential Pressure Digital Manometers
Pitot tube Airflow
Carbon Dioxide Test Meters
Relative Humidity (%RH) Instrument
- Ammonia, Ozone, H2S, HCN, CO2, CO, NO, NO2, EtO, Cl2, HCl other specific gas parameters
Formaldehyde Data-Logger, stand-alone Monitor
Particulate Concentration, Particle Count Sensors
Laboratory Fumehood Test Instrumentation
Advanced Report Generator; efficient, detailed professional Environmental Reports
Indoor Environmental IEQ, IAQ Survey Meters
Volume Flow & Ventilation Test Meter
UniTec Srl
UniTec Srl was founded in year 2000 to design, develop and manufacture innovative instruments in the field of air quality monitoring. With their experience in the market of air quality and water continuous monitoring systems, they provide Consulting, Design and Support Services to our customers.
The ETL3000 is a multi-component air quality monitor for measuring airborne pollutants in parts per billion (ppb) concentrations. The system is based on a new solid-state thick-film sensor technology, which provides excellent sensitivity and accuracy. The performance of the sensors is superior to conventional electrochemical cells. The monitor provides measurement of CO, NO2 and O3. In addition temperature, humidity and noise is simultaneously measured. The system has a built-in data logger and a GSM modem (optional). Analysis of C6H6 and other parameters with thick film sensor is also available as an option.
The ETL3000 is designed specifically for outdoor installation. A mounting kit is supplied, suitable for any pole diameter. The electronic part is now based on a microprocessor with flash memory and it is completely separated by the sensors. Each sensor is independent and is installed inside its cell (SENS3000) and connected to the electronic with plug-play connectors. The sensors can be replaced easily in the field.
Our innovative application of Mobile Monitoring of Traffic Pollution in cities can be done by installing the ETLBUS system on public transport vehicles and positioning using GPS.
It is possible to develop special custom applications of ETLBUS and software with GIS system to handle also instantaneous data positioned on the local map.
NEO Monitors
Open Path Monitor
NEO Monitors LaserGasTMII Open Path (OP) Monitor is s a compact, high performance gas analyzer for long distance monitoring in ambient air. Measurement lengths of up to 1000 m. The OP Monitor utilizes a transmitter / reflector configuration to measure the average gas concentration along the optical line-of-sight. As option a self-contained, battery-powered version is available with a control keypad and a flash memory for data logging.
The monitor is installed on our proprietary x/y alignment platform (goniometer). Adapters for fixed installation on platforms or for tripod use are available. The instrument also includes a visible aiming laser and sighting optics for easy alignment even over long distances. Hoods for protection of the optical windows on transceiver and reflector side can be supplied.
Product application:
C2H2, C2H4, C3H6, CH4, CO, CO2, H2O, H2S, HCL, HCN, HF,N2O, NH3, NO, NO2, O2, VCM
TDLS Analyzer
The first all-in-one TDLS analyzer is a complete gamechanger.
NEO Monitors’ LaserGasTM iQ2 analyzer is the first to measure four gases (O2, CO, CH4, H2O) and temperature in one unit, which eliminates the need for multiple units for combustion analysis. The cutting-edge design and ground-breaking functionality, ensures that the instrument delivers unmatched reliability and durability.
aserGasTM iQ2 is developed on a well proven technology platform. With innovative design and extraordinary spectroscopically and optical solutions, the customer gets an accurate and reliable analyzer solving application needs such as FCC units, package boilers, process heaters, electrostatic precipitators, VCM waste gas recovery, reformer gas, incinerator and so forth.
By providing an optional single flange or cross stack configuration, installation cost can be significantly reduced. Customers may replace existing analyzers where explosion risks or high maintenance issues are a huge concern.
01dB Brand of ACOEM
Noise and vibration monitoring systems have been developed with clear objectives in mind:
- Flawless metrology
Innovative technologies appropriate for monitoring
A range of services to suit every need (data sales, sales of turnkey projects, publication on a dedicated website, etc.)
The issue of monitoring noise and vibrations has been attracting increasing levels of attention in a variety of fields, including construction, motor sports, town planning and the industrial sector. We have a wide variety of instruments to suit each individual need.
LAMTEC GmbH & C0. KG
LAMTEC develops and manufactures sensors and systems for combustion technology. Reliability, efficiency and highest standards on functionality define our product range since more than 20 years. Already before foundation, todays LAMTEC team introduced the O2-control into the market in 1982.
LAMTEC systems increase the efficiency of power plants and combustions, reduce fuel consumption and particulary the emission of polluting CO2. Doing so, we attach importance on our in-house development and manufacturing as well as an universal and technician-friendly application of our systems.
We deal in a wide a range of technologically advanced VOC detectors, leak detectors, benzene monitors, mercury analyzers and corrosion monitors, all distributed worldwide
- Benzene Monitors[/fusion_li_item]
GasCheck Leak Detectors
Ground Gas Monitors
Hydrogen Flux Monitors
Mercury Vapour Detector
PID / VOC Detectors
SF6 Gas Leak Detectors
Ion Science Ltd.
Ion Science is the largest manufacturer of photoionisation detection (PID) sensors with our technology trusted by major gas detection manufacturers around the globe. As well as sensors, Ion Science manufacture a range of leading handheld, personal and fixed PID detection instruments for the fast, accurate detection of volatile organic compounds (VOCs). Additional to the PID range are our gas leak detectors, SF6 leak detectors, and portable mercury detectors.
Corvus Indoor Air Quality Monitor
Corvus is a continuous, wireless VOC monitor for Indoor Air Quality (IAQ) containing sensors for temperature,barometric pressure and humidity. Corvus utilizes high sense technology detecting Volatile Organic Compounds (VOCs) down to low parts-per-billion (ppb) levels. Its wireless capabilities allow a network of up to twenty instruments to be deployed around the building, with data downloaded and managed via just the one instrument.
LEO Multi-gas Monitor
LEO is a portable multi-gas monitor providing accurate detection for workers against volatile organic compounds (VOCs). LEO measures and displays up to 5 gases simultaneously, is fully programmable with on-board data logging and is an ideal tool for confined space applications.
Tiger Select – Benzene & Total Aromatic Compound (TAC) Detection in one Instrument
The Tiger Select is revolutionary hand-held gas detector with two mode operation for the rapid detection of benzene and Total Aromatic Compounds (TACs) providing accurate, reliable data you can count on.
Utilizing the high output Ion Science 10.0eV detection system, a reading for Total Aromatic Compounds (TACs) is seen immediately on start-up. Should aromatics be detected, a Draeger benzene pre-filter tube can be easily attached to ensure rapid detection and selective measurement of benzene.
GasCheck Leak Detectors
Technologically advanced gas detectors, PID/VOC detectors, SF6 leak detectors, mercury analyzers and corrosion monitors, etc are distributed worldwide.
The GasCheck G gas leak detector represents the latest in gas detection technology. Its advanced system of micro thermal conductivity enables improved sensitivity for the rapid, effective detection of gas leaks down to cc/sec, mg/m³ or ppm levels.
Designed for the search and location of gas leaks, the GasCheck G leak detector provides you with effective detection of almost any gas or gas mixture. Robust and reliable, the GasCheck G leak detector gives stable, repeatable readings of the detected gas. The instrument’s LCD display, LED indicator and audible sounder clearly indicate the leak present.
PID/VOC Detectors
The Tiger VOC detector is a revolutionary hand held PID instrument for rapid, accurate detection of volatile organic compounds (VOCs). Its photoionisation detection (PID) capabilities utilise advanced patented Fence Electrode technology, a 3 electrode format with increased resistance to humidity and contamination.
A robust hand held VOC detector, Tiger provides a dynamic detection range of 1 parts per billion (ppb) to 20,000 parts per million (ppm), offering the widest measurement range of any other VOC detector on the market.
Cub is a personal photoionisation detection (PID) gas monitor for the fast, accurate detection of volatile organic and total aromatic compounds, keeping you safe within your working environment. With market leading parts-per-billion (ppb) sensitivity, Cub sets the standard in personal gas monitoring giving an early warning of exposure to hazardous gases, including benzene.
Comfortable and unobtrusive to wear, Cub is the smallest, lightest, personal PID gas monitor available. Cub has a dynamic range of 1 ppb to 5000 ppm, the widest on the market measuring 480 selectable compounds.
The Cub personal PID gas monitor is available as a standard instrument with 10.6 eV lamp for accurately detecting a wide range of volatile organic compounds (VOCs) to parts-per-million (ppm) levels. The CubTAC ppm variant with 10.0 eV lamp accurately detects total aromatic compounds (TACs), including benzene. Both models can be upgraded with parts-per-billion (ppb) sensitivity quickly and easily via our micro website.
Benzene Monitors
The latest product is the Titan benzene selective monitor a world first in the specific detection of benzene with no cross sensitivity to other VOC gases. Set to change the game in refinery applications, the instrument detects benzene at sub ppm levels collecting continuous, real time data and hence is the first truly selective benzene monitor in the market.
The instrument is wall-mounted with a dynamic range detecting benzene for 0.1 – 20 ppm. Titan samples gas from the environment once per minute and within just 60 seconds an accurate benzene measurement is displayed.
LAND Calibration Laboratory – Dronfield
The LAND calibration facility was formed so that customer requirements for temperature calibration can be satisfied.
The laboratory offers a comprehensive service for the calibration of temperature sensors and sources including; radiation thermometers, thermal imagers, thermocouples and blackbody sources.
he LAND laboratory, in the UK, was the first to be accredited in 1970 for the issue of Calibration Certificates in the field of thermal measurements and was also the first to be accredited for the issue of certificates that meet the requirements of ISO 17025.
Re-Calibration Reminder Service
Regular traceable calibration is essential for temperature measuring equipment if accuracy is to be maintained. Many authorities, particularly the Ministry of Defence and Rolls Royce specify the frequency of re-calibration for sub-contractor’s instruments.
Remembering re-calibration dates is often a cause of trouble and concern, particularly when more than one type of device is used, as thermocouples, radiation thermometers and potentiometers all have different re-calibration frequencies.
In order to remove this burden from the instrumentation engineer we have introduced a Re-calibration Reminder Service. With this service customers automatically receive a written reminder when any item of temperature measuring equipment is due for re-calibration.
Emissivity Determination
For accurate temperature measurement with radiation thermometers the emissivity of the measured surface must be determined.
For customers who do not have the necessary equipment and know-how to obtain this vital parameter LAND provide a service which is fast, convenient and accurate.
Simply send a sample to our laboratory together with your order.
We will conduct the required tests and return the sample with the emissivity information. Ideally the sample should be supplied as a 50mm diameter disc. We will extract a suitable sample from your material in our laboratory as an extra service.
FEATURED PRODUCTS
Electro Mechanics
Airpack Netherlands
Airpack is the manufacturer of custom made packages for the oil and gas industry. Airpack make packages with compressors, dryers and nitorgen generators. Airpack design, manufacture and test all the installations completely according to the customer’s specifications and petrochemical standards.
Compressors
Airpack compressor packages are supplied according to the customer’s requirements and can be configured with reciprocating, screw or centrifugal type compressors. Packages come completely assembled and ready for start-up including all interconnecting piping, wiring and custom programmed PLC Control. Compressor Packages Include:
- Screw Compressors
Reciprocating Compressors
Centrifugal Compressors
Dryers
Airpack dryer packages are custom designed according to their required dewpoint, operating capacity and pressure. In-house expertise allows us to engineer the best suitable dryer type for the required application. Airpack can offer the following dryer types based on preference and/ or application:
- Heatless Adsorption
Heated Adsorption
Refrigerated
Membrane
Nitrogen Generators
Airpack membrane type nitrogen generators are the most efficient and easy solution for safety gas supply. Ready-to-run upon arrival, Airpack nitrogen generators require just minutes to reach their required purity and can deliver up to 99.9% nitrogen. Airpack can offer the following types:
- Heatless Adsorption
Membrane
PSA
Halton Group
Halton Group specializes in indoor climate and indoor environmental products, services and solutions. Halton’s aim is to create comfortable and safe indoor environments that have energy-efficient and sustainable life cycle.
Halton Marine Division
Dampers, Diffusers
Safety is the most important in extreme working conditions, where a fire could put people’s life at risk unless necessary precautions are taken. Therefore it is essential that the equipment chosen to prevent fire progression within a ventilation ductwork is top-class. Because smoke and other toxic gases can be more dangerous than the fire itself, it is important that the fire dampers also prevent smoke from spreading. Halton is the manufacturer supplying smoke-tight fire dampers.
Marine Services
Indoor climate solutions – products and systems – for various environments and quality of indoor environment from design to the use of the facility
Marine HVAC Audits – Ships are required to dry-dock every now and then. Major overhauls usually extend the ship’s life cycle, attract new passengers and create an opportunity to upgrade the ship with modern up-to-date solutions.
Successful dry-docking requires a great deal of planning and some serious decisions concerning what should and can be done. Prior to dry-docking, Halton Marine can offer an HVAC Audit for galley and cabin ventilation – the areas that use a substantial part of HVAC. Based on the HVAC Audit, Halton Marine draws up a report on the upgrades, improvements and solutions it recommends in order to have a better functioning system. When these improvements have been carried out, Halton Marine conducts another survey to compare the results to the original values and to verify the results.
Halton Marine has improved the energy efficiency, safety and the indoor environment quality in many major refurbishment projects.
Halton Food Services Division
Kitchen Ecology Units
Solutions range from public and commercial buildings to health care and laboratories, commercial kitchen and restaurant applications and recognized indoor climate solutions for marine and offshore applications. Areas of expertise and product ranges cover air diffusion, airflow management, fire safety, kitchen ventilation, air purification and indoor environmental management.
SSD Drives – Parker Hannifin
Precision-engineered solutions for a wide variety of markets – aerospace, climate control, electromechanical, filtration, fluid and gas handling, hydraulics, pneumatics, process control, sealing and shielding.
- Aerospace Systems and Technologies
Air preparation (FRL) and Dryers
Cylinders and Actuators
EMI Shielding
Filters, Separators & Purifiers
Gas Generators
Medical & Dental equipments
Motors, Drives and Controllers
Pumps
Fittings
The fittings provide leak free solutions including the most comprehensive range of instrumentation products ranging from Single (CPI), Double (A-lok) compression Fittings, Instrument Pipe and ISO conversion Fittings, MPI fittings, Tube ended pressure gauges, Phastite, Ultra seal fittings, Vacuseal fittings, Welded Fittings, Tube fabricating Equipment, Manifolds, Ball, Needle Valves and sub -system for the varied oil & gas, power generation, process analytical and alternate fuel markets.
Focus on solving some of the world’s greatest engineering challenges sparks passion for innovation and the Technological expertise secures a more sustainable future growth.
Rittal GmbH & Co. KG
Product Range Includes:
- Innovative enclosure
Power Distribution
Climate Control
IT infrastructure
Software & Services
System Accessories
All these together on a single system platform, complemented by extensive range of software tools and global services, creating a unique added value for all industrial applications: Production plant, test equipment, facility management and data centres
In accordance with the simple principle, “Faster – better – everywhere”, innovative products and efficient services are combined to optimum effect.
SAACKE Group
Burners and Burner Management Systems
Boiler and Process firing systems – reliable solutions, highly efficient with low emissions
- Industrial Burners and burner control systems
Combustion chambers & Hot gas generators
Marine burners & boilers
Exhaust gas cleaning
GCU Marine combustion chambers
Combustion air supply system
Installation, commissioning, inspection/maintenance/repair, plant and engineering consultation and training services available.
Winsted Control Room Consoles
Control room console solutions – attractive, ergonomic consoles that work with operators to improve comfort and optimize efficiency. Customized consoles suitable for any control room application, for control rooms from the ground up, or just upgrading operations, Experts combine the disciplines of industrial design, ergonomics and interior design to create solutions that are both efficient and eye-catching.
Special consideration to the ergonomic requirements of operators to build consoles that reduce fatigue, improve productivity and inspire. Commitment to customer service is second-to-none and satisfaction is guaranteed.
- Envision command consoles
Sight-line consoles
Slat-wall consoles
E-SOC control stations
Encompass-2 workstations
M-View monitor walls
Pro-series I & II Racks
Swimming Pool Solutions
A one stop solution for everything related to Pool and Spa projects – from motors to tiles and various accessories.
- The Solar option – available in two versions: the Polytub S for ground-level installations and the Polytub M for roof installations
The heat pump – an intelligent solution to transfer heat from the air into pools
The heat exchanger – works with existing low-energy consumption home boilers operated on natural gas – also suitable for propane gas or oil boilers
Pool heaters – to heat pools extremely quickly with adjustable power to suit the volume of water to be heated
- The Aqualarm – alerts in the event of a fall into the pool, whilst avoiding false alarms due to environmental disturbances (weather or service equipment such as the cleaner robot or filter system) – in compliance with International Safety Standards and Pool Safety Laws
The Molder Disnova water slide – UV resistant, stainless steel components, access staircase with non-slip steps, aluminium handrails and safety bar, lateral water jets to soak the slide – available in 3 models: left curve, right curve, straight curve and straight
The New Wave water slide – high density Polyethylene material, non-slip 5-rung ladder, handrails & handle – anti-corrosion treated paint finish
FEATURED PRODUCTS
Instrumentation
HyControl Ltd.
Types of Level Measurement tools – radar, TDR, ultrasonic, thruwall, hydrostatic, plumbob, bypass and foam
Types of Level Switches – Float, rotary paddle, capacitance, admittance, vibrating probes of solids, tuning forks for liquids, microwave, foam and conductivity.
SILO Protection – a pneumatic conveying operation is necessary to prevent over-pressurization or over-filling. The pressure sensor, level sensor and the pressure relief valve alert on likely danger and ultimately provide relief of dangerous pressure. Monitoring the level and pressure allow other control functions to be activated such as:
- High level alarm
High pressure alarm
Tanker fill pipe shut-off
Activate filter alarms
Alarm on a PRV event pressure
Provide filter blockage information
Provide valuable preventive maintenance info
Record the number of high pressure events
Record the number of PRV lifts
Record the number of near miss events
Fluid Components International LLC
Mass Flow Meters, Flow and Level Switches for Process Measurement and Automation. Rugged, accurate, repeatable superior quality designs have made FCI the leader in thermal dispersion mass flow meters, flow switches and level switches for industrial process measurement applications. FCI air and gas flow meters are applied from small dosing lines to the largest stacks.
- Mass Flow Meters
Gas Flow Meters
Liquid Level Switches
Gas Flow Switches
Liquid Flow Switches
Tempsens Instruments (I) Pvt. Ltd.
- RTDs (Resistance Temperature Detectors) – assemblies and sensor elements
Thermocouples – mineral insulated, base metal and precious metal elements
Thermowells and protection sheaths – metals & ceramic
Temperature sensing components and accessories
RTD’s – offer accurate temperature measurement from -200 Deg C to + 800 Deg C – Wire wound & Thin Film Sensors, Ceramic Encapsulated, Class A& Class B accuracy. Protection sheath SS316, SS304 and other grades and sizes from 3 mm to 15 mm and more.
Wire configuration -2-Wire, 3-Wire and 4-wire, Simplex and Duplex constructions – Sensor Elements have calibration & traceability to ASTM E585 / E 585 M – 01a, BS EN 60584-1 IEC 584, IEC 1515, ANSI / MC 96.1.
Thermocouples – Element Types: K, N, J, E, T, R, S, B, W. – Simplex, Duplex & Triplex, covering wide temperature Range 0 to 2350 deg C…
Sheath sizes: from 0.5 mm Dia to 12.7 mm Dia, Mineral Insulated – MgO, Al2O3
Sheath materials: SS316, SS310, SS321, Inconel 600, Molybdenum etc.
Sensor Elements have calibration & traceability to ASTM E585 / E 585 M – 01a BS EN 60584-1; IEC 584, IEC 1515, ANSI / MC 96.1
Thermowells – protect the basic sensor from mechanical damage, pressure and corrosion. Materials available are SS304, SS316, SS310, SS321, Inconel 600, Inconel 601, Inconel 625, Incolloy 800, Monel, Stellite, Hastelloy, Brass, etc
Wake Frequency Calculations are done in accordance with ASME PTC 19.3
Types of Thermowells:
- Bar Stock Threaded (NPT, BSP, Metric)
Bar Stock Flanged
Bar stock Van stone
Bar Stock socket weld
Bar Stock welded-in bar stock ground joint
Bar stock clamp joint
Moor Industries
Temperature Transmitters, Sensors & Assemblies
Temperature transmitters allow you to take weak signals of low-level RTD or thermocouple temperature sensors, and convert it to high-level analog signals more appropriate for long-distance transmission through a loud plant, and prepared for direct interface with an indicator, recorder, PLC, DCS or PC-based SCADA system.
Signal Transmitters, Isolators & Converter
Convert, isolate, split, boost, and step down process signals so field instruments can interface directly with indicators, recorders, DCS, PLC, and PC-based SCADA systems. We provide a wide range of interface solutions.
Katronic Technologies Ltd.
Specialized clamp-on ultrasonic flow meters and non-invasive process measurement instruments
manufactured with state-of-the-art electronics and sensor technology that are highly reliable and easy to operate.
The clamp-on ultrasonic flow meters of the KATflow series can measure on pipes of every common material and diameter.
Sensor Technology
Rotary Torque measurement solutions and sensors – exclusive technology for instrumentation, test and OEM markets, capable of measuring torque ranges from 10mNm to 13000Nm
Digital RWT310/320 Series torque sensors with integrated electronics and the digital RWT330/340 Series torque sensors with separate electronics include the latest non-contact TorqSense (SAW) technology. Also offer Optical and Strain Gauge technology torque transducers. TorqView, based on NI LabVIEW, is available as an easy to use Advanced Torque Monitoring software tool to assist data recording.
Customers can specify any full-scale torque range, within the standard range, to optimize accuracy. Included within the purchase is a free calibration for the first year and a Lifetime Warranty.
Richards Industries
Popular brands of – Jordan Valve, Steriflow Valve, Low Flow Valve, Marwin Valve and Bestobell Steam Traps, various types of Pressure Regulators, Back Pressure Regulators, Temperature Regulators, Control Valves, and Sanitary Valves since 1940 under Jordan brand. “Sliding gate design” was first developed in 1947 by William Jordan.
2-piece, 3-piece flanged, 2-way, 3-way ball valves with actuators & accessories are manufactured under the brand “Marwin” and steam Traps under “Bestobell”.
MEYLE
A one-stop solution for major well known Instrumentation & electrical items from Siemens, ABB, E&H, Pepprel & Fuchs
Also manufacture level, flow and pressure sensors as well as transducers and encoders. Some of the most common products supplied are as follows:
- Drives control units
Relays PLC, Encoder
Pneumatic valves, cylinders
Proximity sensors
Circuit breakers, mini power supply
Agar Corporation
Development, design, and manufacture of multiphase flow meters (MPFMs), oil/water meters, interface, emulsion & foam detectors, and hydrate detectors. Our solutions increase the efficiency of oil production and processing in applications such as heavy oil well testing, waste water treatment, automatic tank dewatering, desalters, emulsion & foam control, and hydrate detection where hydrocarbons and aqueous mixtures are present.
Interface Detectors
The ID-200 Series Interface Detectors are used for interface measurement and control in all types of liquid/liquid and vapor/liquid separation processes including emulsions and foam.
A wide range of models, process connections, and output options are available for the control of a variety of process installations such as Tanks, Decanters, Dehydrators, Desalters, Coalescers, etc. The ID-200 Series advanced control capabilities can be used to automate upset responses, antifoam and demulsifier chemical feed systems, and eliminate cross-contamination of separating phases.
Oil/Water Meters
Agar’s OW-200 series is a second-generation design, microwave based liquid/liquid analyzer developed by Agar Corporation after introducing the first 0-100% oil/water meter to the market in 1985. Our current design is the only device in which the accuracy of the measurement is not affected by changes in salinity, density, viscosity, temperature or velocity of the components being analyzed.
Applications:
- Crude Oil and finished pipeline monitoring
Oil in wastewater
Glycol and water
Aqueous/organic measurement
Multiphase Flow Meters
The AGAR MPFM is a non-nuclear, versatile, three-phase flow meter designed for true field conditions. It provides accurate, real-time measurements of oil, water and gas flows simultaneously without separation of the phases. Specially designed for low maintenance and ease of operation, they require no field calibration or prior knowledge of fluid properties (such as fluid density and salinity) to attain the specified accuracies. The real-time data capabilities of these meters allow for optimization of all types of critical production enhancement techniques.
Advantages of the Agar MPFM-50 series:
- Gas void fraction 0-100%
Water-cut 0-100%
Not affected by flow regimes
High accuracy, real-time flow measurement
High and low viscosities
No nuclear (radioactive) sources
Compact, portable, and easy to transport and install
Wet gas application
Hydrate Detectors
Measurement of the water-cut and hydrate presence is performed by measuring the complex permittivity properties of the flow stream using the multiple high frequency method. This method will compensate for the effected of changing hydrocarbon composition and water salinity while providing two unique outputs, one for water cut, the second for hydrate concentration.
The presence of hydrates, within a pipeline, can severely impair fluid flow and requires regular pigging. Low Dosage Hydrate Inhibitor (LDHI) or methanol injection is used to minimize hydrate formation. By detecting the presence of hydrates, LDHI or methanol injection can be optimized.
EDIBON International
Technical Teaching Equipments
Internationally renowned, more than 3000 patented Technical Teaching Units and 2800 different software packages for various fields of science.
Complete laboratory and Industrial Systems, based on several new Teaching Techniques like 3D Physics, Computer Aided Instruction (CAI), Real Time Control, Computer Control (SCADA), Photo-elasticity etc. The SCADA – NET System, in exclusive and extensive ranges cover:
Physics
- Secondary education
Advanced physics laboratories
Electronics
- Technical and vocational education electronics laboratories
Higher education electronics laboratories
Telecommunications
- Technical and vocational education telecommunications laboratories
Higher education electronics laboratories
Fluid Mechanics
- Fluid Mechanics Laboratories – Phase-1
Fluid Mechanics Laboratories – Phase-2
Fluid Mechanics Laboratories – Phase-3
Process Control
- General Process Control laboratory
Process Control and maintenance training centre
Regulation, control and process control laboratory
Time Electronics
- Decade Boxes – Resistance, capacitance, and inductance
Portable Voltage and Current Test Equipment – Handheld and transportable calibrators, simulators, and sources
Portable Loop and Temperature Calibration Instruments – Handheld loop calibrators, RTD and thermocouple calibrators
Pressure Calibration Instruments – Calibration pumps, pressure calibrators, and digital gauges
- Electrical Test Calibrators – Instruments for rapid calibration of electrical test equipment
Multifunction Calibrators 5025E, 5025C and 5051 – Precision calibrators for wide workload coverage
ATE/Bench Calibrators and Digital Multimeters – Programmable calibrators and benchtop DMMs
Calibration Benches – Comprehensive modular test benches and complete laboratory design
Calibration Software – For laboratory, office, and site calibration work
FEATURED PRODUCTS
Health & Safety
Being an environmental company, Newtech started its activities in the field of Air & Water – first started marketing water purification systems based on copper & silver ionization, Indoor air purification systems which helps clean the indoor air pollution from smoke, dust, etc., Also started selling air curtains which prevents dust getting inside and at the same time preventing air conditioned air going out thus saving 40% energy. Slowly, it entered into the industrial market – supplied dust collectors, participated in the ESP, Sewerage treatment plants, etc,
Since it has been already in the indoor air quality market, clients started asking as to how to find out the quality of the air in the office buildings, etc. Which resulted in signing an agreement with the largest producers of Indoor Air quality monitoring instruments, Graywolf in the year 2003. Now Newtech thus supply, commission and train Graywolf instuments in the middle east.
To cater to the commercial market, Newtech started marketing HAVC systems (air handling units of ABB/Flakt and successfully executed Bahrain City Centre and its hotel fit outs, King Hamad Hospitals, Royal College of Surgeons of Ireland projects.
BW Technologies
Innovative gas detection instrumentation – success achieved through a commitment to providing customers with high performance, dependable products backed by exceptional customer service and support. Pioneering the Rig Rat, the world’s first wireless solar-powered gas detector
A new area of gas detection – the fixed systems market, broadening the industrial base, expanded into portable gas detection market, the world’s smallest multi-gas detectors:
- Gas Alert Max XT II
Gas Alert MicroClip XT
Gas Alert Micro 5
MicroDock II
GrayWolf Sensing Solutions, LLC
Indoor air quality (IAQ) Monitors make proactive IAQ surveys efficient and easy to conduct. They optimize the balance between facility energy efficiency and occupant health & comfort. Identify potential IAQ issues before they become problems and respond immediately to complaints with the highly accurate, extremely advanced and most intuitive portable IAQ meters and test instrumentation available today.
These IAQ meters are designed for both walk-thru surveys and for long term (hours/days/weeks) trend logging: the 2 modes necessary for thorough indoor air quality investigations.
Other Products:
- Toxic Gas Test Instruments
TVOC (PID) Monitor
Air Velocity Meter
Differential Pressure Digital Manometers
Pitot tube Airflow
Carbon Dioxide Test Meters
Relative Humidity (%RH) Instrument
- Ammonia, Ozone, H2S, HCN, CO2, CO, NO, NO2, EtO, Cl2, HCl other specific gas parameters
Formaldehyde Data-Logger, stand-alone Monitor
Particulate Concentration, Particle Count Sensors
Laboratory Fumehood Test Instrumentation
Advanced Report Generator; efficient, detailed professional Environmental Reports
Indoor Environmental IEQ, IAQ Survey Meters
Volume Flow & Ventilation Test Meter
Air Quality Engineering
Air Quality Engineering has drawn on the past 30 years of experience to manufacture complete air filtration systems that provide the most filtration performance, efficiency and capacity for the money. Our experience has led to the unique Coanda airflow pattern increasing the performance of the air cleaner as well as heat distribution of your environment, our patent pending variable voltage technology to increase filtration efficiency and variable speed controls to fit the demands of the moment.
Products include:
- Smokemaster® line of ESP for tobacco smoke
Miracle Air &EverClear line of HEPA type media air cleaners
Fume Fighter line fume filtration equipment for solder fumes
Mist Buster line of oil and mist collectors.
Mars Air Systems
Mars Air Systems has been manufacturing high quality air curtains for over 50 years. Our air curtains protect building environments from energy loss and windborne dust, dirt and fumes, along with flying insects. The air barrier created by the light stream of air over a doorway helps to improve inside sanitation and reduce operational energy costs.
Mars Air Curtains qualify for LEED point credits when utilized with in a building management system and help to support Green Build initiatives. Mars is a global company with factory trained manufacturers representatives and dealers/distributors located across the US and internationally.
Products include:
- Lo-Pro for Commercial & Quiet applications
Standard HV & EP Series for Industrial applications
HEPAC Air curtains for hospitals & Clean rooms
Caribbean Clear
Ionization system, based on the NASA technology. A computer monitors the water condition and electrode wear and then introduces minute amounts of copper and silver ions into the water. Copper is an excellent algaecide and the EPA reports that extremely small amounts of silver are sufficient to sterilize water.
Computerized automatic controller can inject right amount of copper and silver ions and also dose right amount of Chlorine/Bromine and Hydrochloric acid to maintain the balance of pH in the swimming pool water.
Caribbean Clear offers a full line of copper/silver ionization products for spas, backyard pools and commercial applications. Experience has shown that matching ionization performance with water volume and the water’s characteristics is important for proper performance and optimum efficiency. Each Caribbean Clear system offers at least 10 output settings which allow full control of the ionization output and the resulting levels of copper and silver. Periodic testing with the included test kit will allow the pool operator to determine the copper level and make any adjustments necessary.
Carmanah Technologies
We have ventured into the business Airfield Safety & other solutions with an intention of serving all the major International and National Airports in the GCC Region and other countries as well.
Airfield Lighting
We provide a wide range of flexible airfield lighting solutions using the most cost-efficient and scalable solar energy source.
The durable airfield systems install within hours for maintenance-free operations without grid power, buried cable or airfield electrical vaults. With rugged, wire-free designs and sophisticated solar energy management systems, these products are ideally suited for use at locations around the globe.
- PAPI / APAPI (Precision Approach Path Indicators)
Runway Lighting
Taxiway & Apron Lights
ERGL
Helipad Lighting
Wind Cones
Airfield Signs
Wireless Controls
Obstruction Marking
Platan Sp. z o.o. Sp.k.
Platan is a leading manufacturer of Public Warning Systems branded digitex and PBX Systems branded Platan. In the design offices, highly qualified telecommunication and electronic specialists create solutions based on state-of-the-art global technologies and trends. All of the products are tailor made to meet market needs and expectations.
Digitex offer high quality DSE Electronic Sirens, radio- and telecommunication solutions. The products are widely used by Civil Defence, Fire Services, Emergency Ambulance Services, other rescue services as well as public institutions and the business sector.
Products Include:
- Public Warning Systems
Electronic Sirens
digitexRDS Dispatcher System
Telecommunication Systems
OWLS AG
OWLS Security Solutions Include:
- Embedded, Invisible IP-Camera
Optimized LED Lighting
CCTV Security and Analytics
Customized Added Value
In an ALL-IN-ONE Solution.
Traffic Logix
Radar Speed Signs
SafePace 100 – Portable compact solution offering exceptional visibility and power efficiency at remarkably affordable pricing.
SafePace 400 – is a static “YOUR SPEED” radar speed sign, competitively priced, with full range of functionality and outstanding features such as easy-to-use management software, sign scheduling, data collection, robust statistical reporting, low power consumption and unique vandal resistant construction.
SafePace 600 – this versatile radar feedback sign has two lines of completely customizable LEDs that can display text, graphics, or animation. Displays chosen message(s), based on scheduling or driver behavior, ranging from just speed alerts to notifications about an event, construction or dangerous road conditions.
SafePace 700 – similar to Safe Pace 600 except for larger display digits.
SafePace 800 – offers unparalleled versatility with both radar speed display and variable message board in one streamlined sign), based on scheduling or driver behavior. The full matrix LED sign can be rotated from a vertical driver feedback sign to a horizontal message board.
School Zone Systems – protects children around their schools by reducing the speed of passing cars and decreasing the likelihood of vehicle accidents. The school zone flashing signs are a low cost, low maintenance traffic calming alternative that ensures children can walk and bike to school safely. The flashing school zone system accommodates any of the Traffic Logix SafePace radar speed display signs.
SafePace Beacon System – provides a visual alert to drivers of changed driving conditions such as school zones, pedestrian crossing, or construction ahead, proven to improve safety by making drivers more vigilant and are a low-cost, low-maintenance solution.
Modular Rubber Solutions
- Speed Humps – Traditional traffic calming to slow cars on residential streets.
Speed Tables – Flat topped speed humps for more gradual speed reduction.
Speed Cushions – Series of small speed humps that slow cars without impeding emergency vehicles.
Speed Bumps – Highly visible speed bumps slow traffic to between 2-5 mph.
Alley Bumps – Designed to address speeding and cut-through in alleyways.
FEATURED PRODUCTS
Energy & Power
Emerson Network Power
Custom built Uninterruptible Power Systems (UPSs) for all industrial (including Oil & Gas) and critical applications in the world.
On-line double conversion technology protects and isolates the load against black out, brown out and all power quality disturbances
Product range includes:
- Single–phase AC UPS
Three-phase AC UPS
DC UPS systems
Battery and battery protection (MCCB) box
Battery monitoring system
AC and DC distribution panels
- Connectivity and monitoring solution
Mizar & Alcor UPS 10-15KVA & 20-30KVA
Quasar & Vela UPS from 40 to 60KVA
Atlas UPS from 80 to 120 kVA
Super Nova 150KVA – 500KVA
Phoenix Contact GmbH & Co. KG
Electrical and electronic automation engineering range of products include: various types of terminal blocks / 3 way isolation amplifiers / Signal duplicator, Multiplier / Loop powered isolator / Passive isolators / Transducer – Current / Voltage / Frequency / Temperature / 8/12bit A/D converters and D/A Converters / Power Supply units / Surge Protection Devices / Interface Cabling / Industrial Connectors / Electronic Monitoring Relays for Current, Voltage, Phase Sequence and Temperature / Surge Protection Devices for Power Supplies, Measurement & control technology Data networks and standard interface Transceiver systems, telecommunication systems etc.
- Industrial Connection Technology Clipline
Marking System Complete
Signal Converters Interface
Components and Systems – AUTOMATION
Power and Signal Quality – TRABTECH
Field cabling – PLUSCON
PCB Connection Systems – COMBICON
PMI – Power Management Instruments
PMI, Power Management Instruments is a privately owned, technology company who have long-standing experience in high frequency power conversion systems. The company is able to design and manufacture all parts from PCBs, transformers and software to outer chassis in its fully integrated electronic and mechanical production facilities in Ankara. Besides its wide range of power electronics portfolio, the company continually innovates new products and handles custom projects for a broad range of industries covering Oil & Gas, petrochemicals, mining, process industries, energy transmission and distribution as well as healthcare.
Product Range Includes:
- Online UPS
Industrial UPS
Battery Charger / DC Rectifier
SERVO Voltage Regulators
Static Voltage Regulator
Electronic pf Corrector
Inverter
TurboStar Technical Services LLC
Turbostar specializes in manufacture and repairs of hydrodynamic bearings for rotating machinery. Capabilities include both centrifugally cast and statically cast Babbitt bearings. Proprietary methods allows to achieve 100% bonds and porosity free bearings. All bearings are checked dimensionally to verify both bore and housing fits.
Products include a complete line of sleeve bearings, tilting pad journal bearings, equalizing and non-equalizing tilting pad thrust bearings, flat and tapered-land thrust plates for light and heavy industrial equipments for oil & gas, power plants, and marine sectors. The parts are produced with high quality, confidence, and dedication to our customer’s specifications and requirements.
The technical team is exceptionally skilled with over 15 years of experience. Extensive knowledge and library of original parts helps to identify the most critical aspects of the part and then use Solid Modeling technology to repair or manufacture. Turbostar has the capability to re-engineer your products with samples or base data.
Triveni Turbines
The Triveni Group of Companies is a focused, growing conglomerate having diversified interests in Engineering, Co-Generation, Clean Water Solutions, Distillery and Sugar. Triveni’s capability has been in precision engineering and has been in the forefront for over four decades now. The group is a market leader in the engineering business and offers state of the art solutions for the Turbo-Generator island and industrial Gear Boxes. Triveni group has set up the first co-generation plant in India.
Triveni aims to create value and delight for its consumers and stake holders. It incorporates technology as a key differentiator in all its businesses to sustain leadership position and deliver growth.
Services Include:
- Erection and Commissioning
Periodic Overhauling
Long Term Service Agreement
Remote Monitoring
- Training Solution
Spares
Customization and Upgradation
Refurbishing
Comprehensive O & M Services
Summit Electric Supply
Sophisticated Electrical Components, Cables and Project Solutions
- Audio / Visual Signals – Sirens, Bells, Signal Lights
Ballasts – Fluorescent, HID
Distribution Systems – Dry-type transformers, Metering
Products & Switches, Panel Boards, Switchgear & Motor
Control Centres (NEMA IEC), Utility & Pad mount
Transformers
- Custom Distribution Systems – Powerhouses, Explosion- proof switch racks, starters, panel boards, disconnects, combination starters, IEC breakers
Cables – Industrial / Marine – & Fittings – Electrical & Instrumentation Cables, Rig cables, Shipboard cables, Cable glands, Cable termination, Cable trays
Conduits & Fittings – Aluminium, ENT, Flexible, Plastic coated, PVC rigid coated steel, Rigid galvanized steel
Transformers – Buck-boost, Drive isolation, Electro-static, Industrial control, K-Factor, Mini-power centers, Oil-filled pad mounts
Process and Power Automation Solutions
Leveraged for providing unique, creative and practical Automation solutions complete with competitive innovative and professional execution of LTSC MAC, MIC, LDSC contracts for Greenfield, Brownfield, Revamp projects in various sectors.
FEATURED PRODUCTS